Try before you buy! You can download VoiceLauncher and try it before buying. VoiceLauncher is complete and fully working without a registration key: you can create as many voice commands you want and test if VoiceLauncher is the application you need. Without a registration key VoiceLauncher will only execute the first pattern from your database at the very end of the process (step 3), but it will let you make enough experiments before you decide to buy it. Please take your time to read the tutorial, make your tests and ask if you need some help before buying.

VoiceLauncher is the very first voice recognition application publicly announced and made available for Treos, Centro and Tungsten|T3. VoiceLauncher has been fully designed to take advantage of Treos specific features: 5-way navigator, phone application, signal and battery indicators just to give few examples.

VoiceLauncher is working on Treo 600, Treo 650, Treo 680 and Tungsten|T3. It has been successfully tested by third party users on Treo 700p, Treo 755p and Centro. Other devices with PalmOS 5.2 or greater might work but have not been tested.

VoiceLauncher can launch applications, panels and phone calls with all above devices. It can dial through any helper compatible application, and is fully integrated with TAKEphONE phone application, allowing features likes pauses in phone numbering.

You have to select which application to assign to your voice pattern. It can be a panel, an application, or a phone number. To assign a phone number, you can either select Phone, VLauncher VoiceCall or TakePhone if you have it installed. VLauncher VoiceCall will request for phone helpers, Phone and TakePhone will use the chosen application to dial your number. To use pauses, you have to assign TakePhone as your application.

Editing a command is easy, select your command and modify it. You can record a new voice pattern, change the command name or application. Saving will replace the previous command in your database with the new one, you can also delete the command or cancel your changes.

Commands can be stored in the main memory or on a SD card. Please refer to memory card section of this document.

Default method to search for a command is a long press of the Screen PowerOn button, but you can set it to any another key.

Depending on your configuration, you will have to press the 5-way center button (or select the button) to confirm the recognized command is correct, you can talk to confirm this command, wait for it to be launched automatically, ...