Twilight is a new utility developed for the Treo 650 to control the keyboard illumination automatically based on the time of the day.
Set the time and you will most likely never have to manually control the keyboard lights again! Use Twilight to set the time after which the backlight should be enabled and the time after which the backlight should be disabled. When the Treo is switched on the lights are automatically enabled or disabled based on your personal settings and the time of the day. You can also use it to permanently switch the lights ON or OFF.
[
1]
2
craniocrust: The program works fine on my Treo 680
Rob_T: "On a buggy device such as the Treo 650 this app should be updated to include a 'Turn on after reset' tick box - so that Twilight automatically resumes after a reset; and can only be disabled by a manual unticking. At the moment, it's very cumbersome to remember to switch to Twilight after a reset to turn it back on. It's free though, so I should complain ;-)"
I was going to type this same comment...but it's alreasdy here. A "enable after reset" feature would be awesome!
phamiltonsmith: Perfect and SIMPLE!!!
jeeter: This program seems to work well on the Treo 700P, though you have to manually reenable it after a soft reset. Other than that, it's simple and does what it's designed to do.
Chuck Lawhorn: The program works fine. Why would you load software that wasn't designed for your Treo and then give it a poor rating? At the top of this page it says, "Twilight is a new utility developed for the Treo 650..." So why complain that it doesn't work on the 600? Too bad there's no way to rate the reading skills of other participants. Perhaps Taz should brake "4" you.
ibrk4taz: Reboots Treo 600 into a reset when accessing application. I would give it a "0" rating but a "1" is as low as this rating system goes.
nutsnbolts: When twilight is enabled and the phone is off, and snapper mail checks email and turns the phone off, only the kb lights stay on. Have to switch the phone on and off to reset this condition.
edwinh2209: it works, it will turn off the lights alrigh, but whatever state you phone is on at the time your light (as predifined by you) turn on, the keyboard will light up and stay like that, even if your not using your treo, you will have to press the power button so it can go off again....
clie2k: On a buggy device such as the Treo 650 this app should be updated to include a 'Turn on after reset' tick box - so that Twilight automatically resumes after a reset; and can only be disabled by a manual unticking. At the moment, it's very cumbersome to remember to switch to Twilight after a reset to turn it back on. It's free though, so I should complain ;-)
jaa6921: Great APP. however it does not hold the settings on my Treo650. Well thats my experience
[
1]
2